E2660-CO-NO

CO-NO Transmitter
E2660-CO-NO
Features
  • Simultaneous CO and NO monitoring monitoring
  • Range 0...300 / 1000 ppm CO and 0...250 ppm NO
  • Resolution 1 ppm CO and 1 ppm NO
  • Two SPST relays option
  • 2 × 4-20 mA or 0-10 V, RS485
Description

CO-NO transmitter E2660-CO-NO is a member of PluraSens® family of multifunctional measurement instruments.

It is an excellent solution for underground parkings. The device may be also used in boiler houses and other confined spaces, where potentially toxic concentration of carbon monoxide and nitric oxide can accumulate.

The instrument utilises fully calibrated and temperature compensated electrochemical gas sensors with excellent repeatability, stability and long lifetime.

Two relays with closing contact (optional) may be used for remote signalling or concentration control. Two alarm set-points are user settable.

Two analog outputs and RS485 digital interface with industry standard Modbus RTU protocol can be used to connect the detector to safety or building automation systems.


Technical Data
Sensors type electrochemical
Sampling method diffusion
Detection range 0...300 / 1000 ppm CO
0...250 ppm NO
Resolution 1 ppm CO
1 ppm NO
Sensor lifetime CO > 10 years
NO > 12 months
Power supply 12...36 VDC (default),
24 VAC or 230 VAC as options
Digital interface RS485, Modbus RTU protocol
Analog outputs 2 × 4-20 mA / 0-10 V, user settable
Output relays (option) 2 × SPST relays (closing contact),
Enclosure grey ABS plastic, wall mount, IP65
Dimensions H90 × W145 × D50 mm
Operating conditions -20...+50 °C, 0...85 %RH


Similar Products


E2660-CO-NO2 - CO-NO2 Transmitter
E2660-CO-NO2 - CO-NO2 Transmitter
  • Simultaneous CO and NO2 monitoring
  • Two analog outputs 4-20 mA / 0-10 V
  • RS485 Modbus RTU digital interface
  • Wall-mount IP65 protected housing
  • Two SPST relays, acoustic alarm

E2660-CO-CO2 - CO-СO2 Transmitter
E2660-CO-CO2 - CO-СO2 Transmitter
  • Simultaneous CO and CO2 monitoring
  • Range 0...300 / 1000 ppm CO and 0...10 000 ppm CO2
  • Resolution 1 ppm CO and 1 ppm CO2
  • Two SPST relays option
  • 2 × 4-20 mA or 0-10 V, RS485